The Bandfilter TMP is based on the TM design used for stainless steel filters
It’s developed for application with highly corrosive fluids like salt water and acids. The bandfilter TMP is made in polypropylene on all surfaces in contact with the fluid and is using filter paper for efficient filtration.
- Filter paper
- Stainless steel support frame
- Polypropylene containers
- Tank units
- Salt water
- Highly corrosive substances
It's designed for highly corrosive fluids and only a few parts like gear motor, filter paper holder and electrical cabinet are not polypropylene.
The frequency-regulated gear motor ensures gentle and slow movement of band conveyor, which improves filtration significantly.
The level sensor ensures ensures precise use of the filter paper during filtration.
This bandfilter is designed with a conical deep-bed construction which makes it able to handle high volumes in a small area.
Analog control panel
The bandfilter has a simple control panel including alarm lamps to provide information about filter paper status etc.
The bandfilter has a built-in sensor for low paper.
E - European machine directive
The bandfilter is produced in Denmark in accordance with the European machine directive.
|Model||TMP 40||TMP 80||TMP 140||TMP 180||TMP 240||TMP 360||TMP 550|
|Flow capacity||216 l/min||450 l/min||750 l/min||1000 l/min||1500 l/min||2000 l/min||3000 l/min|
|Protection grade||IP 54||IP 54||IP 54||IP 54||IP 54||IP 54||IP 54|
|Control voltage||24 VDC||24 VDC||24 VDC||24 VDC||24 VDC||24 VDC||24 VDC|
|Electric connection||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.||3×230/400V + N + PE 50 hz.|
|Paper width||500 mm||1000 mm||1000 mm||1000 mm||1000 mm||1500 mm||1500 mm|
|Filter areal||0,4 m2||0,8 m2||1,4 m2||1,8 m2||2,4 m2||3,6 m2||5,5 m2|